AIR-GARAGE

1. Clean and degrease the surface. DO NOT USE CLEANER WITH SILICON PARTS! Use a proper cleaner or water with soap.

 

 

 

 

2. Align the image on the surface (use paper scotch)

 

 

3. Fix the image

 

 

4. Remove the back and squeege

 

 

5. Remove the transfer (use 45° angle)

 

 

 

 

 

 

 

 

 1. Clean and degrease the surface. DO NOT USE CLEANER WITH SILICON PARTS! Use a proper cleaner or water with soap.

 

 

2. Remove the back part - non adhesive part (Use 45° angle)

 

 

3. Spray water on the surface and on the adhesive part of the sticker and on the transfer tape

  

 

4. Put the adhesive on the surface, adjust and squeege

 

 

5. Wait untill the adhesive is dry, then remove the transfer (use 45° angle)